product brief CP5004 etlink series quad e1/t1/j1 liu chip copyright ?2006 chiphomer technology limited page 1 of 2 overview the CP5004 is one of the etlink series chips designed by chiphomer technology limited. it is a 4-channels short-haul pcm transceiver with reference clock of 2.048mhz (e1) or 1. 544mhz (t1/j1), contains four independent receivers and four independent transmitters on a single chip. features four channel e1/t1/j1 liu 3.3v supplies with 5v tolerant i/o ultra low power consumption, 120mw per channel (typ.) crystal-less jitter attenuator constant throughput delay meets itu g.736, g.742, g.823 and etsi ctr12/13 specification optimized for sdh applications, meets itu g.783 mapping jitter specification los detector meets itu g.775, ansi t1.231 and etsi ets 300 233 provides non-intrusive protected monitoring points (pmp) per itu g.772 transmits return loss exceeds etsi ets 300166 supports 100ohm t1, 110ohm j1, 75ohm e1 coaxial and 120ohm e1 twisted pair applications programmable waveform shaper ami or hdb3/b8zs encoder/decoder g.772 protected monitoring point channel 2 channel 1 rdp0 rdn0 rclk0 tclk0 los0 mux hardware/host interface tpd2/tnd2/tclk2 rpd2/rnd2/rclk2 los2 tdp1/tdn1/tclk1 rdp1/rdn1/rclk1 los1 rtip3 rring3 ttip3 tring3 rtip0 rring0 ttip0 tring0 rtip2/rring2 rtip1/rring1 mclk serial/parallel port mode,loop0~3,jasel jtag serial rdp3 rdn3 rclk3 tclk3 los3 mon.ma2~ mon.ma0 analog loopback channel 0 clock recovery ja on transmitter ja on receiver hdb3/ami encoder hdb3/ami decoder los remote loopback data recovery digital loopback line driver pulse shaper channel 3 clock recovery ja on transmitter ja on receiver hdb3/ami encoder hdb3/ami decoder los remote loopback data recovery digital loopback line driver pulse shaper analog loopback jtag interface clock generator ttip2/tring2 ttip1/tring1 tdp3 tdn3 tdp0 tdn0 CP5004 lqfp144 -40 to 85
product brief CP5004 etlink series quad e1/t1/j1 liu chip copyright ?2006 chiphomer technology limited page 2 of 2 line coding error counting and insertion analog, digital ,remote and inband loopback test functions hitless protection switching (hps) for 1 to 1 protection without relays jtag boundary scan test port meets ieee 1149.1 selectable parallel/serial host interface hardware and software control modes pins and internal register compatible with cp5009 144 pin lqfp package applications sdh tributary interfaces sonet/sdh multiplexers digital access cross connects microwave transmission systems pbx interfaces e1-e3 mux related products of chiphomer cp5018 ( octal e1 framer) cp5009 ( octal e1/t1/j1 liu) ch5008 ( octal e1 liu) cp5008 ( octal e1 liu) cp5021 ( singale e1transceiver) cp5024 ( quad e1transceiver) cp5028 ( octal e1transceiver) chiphomer technology limited add: 4f, building d, 1618 yishan road shanghai, p.r.c tel: +86-(0)21-64058488 fax: +86-(0)21-64050030 email: sales@chiphomer.com web: www.chiphomer.com
|
